• Number of recordings currently in the IED memory.
• Remaining amount of recordings that fit into the available recording
memory.
• Recording memory used in percentage.
• If the periodic triggering function is used, the time to trigger which
indicates the remaining time to the next periodic triggering of the
disturbance recorder.
A070863 V3 EN
Figure 45: Monitoring disturbance recorder via the LHMI
6.1.3.3 Controlling and uploading disturbance recorder data
Disturbance recorder data can be controlled and read with PCM600.
For more information, see PCM600 documentation.
6.1.3.4 Monitoring fault records
1. Select Main Menu/Monitoring/Recorded data.
2.
To navigate between the fault records, press and .
3.
To enter or exit a submenu, press or .
A071146 V3 EN
Figure 46: Monitoring fault records
Section 6 1MRS756499 A
Operating procedures
68 RED615
Operation Manual
To Next Page
Loading...
Need help?
General
