- 2 -UMC100-FBP
Universal Motor Controller
UMC100-FBP
Technical Description
FieldBusPlug / Issue: 03.2012
Please note the following
Target group
This description is intended for use by trained specialists in electrical installation and control and automa-
tion engineering, who are familiar with the applicable national standards.
Safety requirements
The responsible staff must ensure that the application or use of the products described satisfy all the
requirements for safety, including all the relevant laws, regulations, guidelines and standards.
Using this Handbook
Symbols
This technical document contains markers to point the reader to important information, potential risks and
precautionary information The following symbols are used:
Symbol to indicate a potentially dangerous situation that can cause damage to the
UMC or connected devices or to the environment
Symbol to indicate important information and conditions.
Symbol that indicates a potentially dangerous situation that can cause personal
injury
Abbreviations
UMC Universal Motor Controller
DCS Distributed Control System
PLC Programmable Logic Controller
GSD Device description file for PROFIBUS networks
EDS Device description file for DeviceNet networks
FDT/DTM Device driver technology for field devices. Specified from the FDT group.
NC / NO Normall closed / Normally open
FBP FieldBusPlug is the name for a group of products which allows to connect ABB low
voltage control products to different fieldbusses.
Related Documents
Technical Documentation Document No.
DTM manual for FBP devices 2CDC 192 012 D02xx
Manual of the custom application editor 2CDC 135 014 D02xx
To Next Page
Loading...
Need help?
General
