AGCO FENDT 1038 Vario S4 User Manual

3.3.4 Fault code 03.1.00 -
Fault code DIN brief description Cause Consequences Remedy
03 = multifunction armrest (MFA) 0, 1, 2 = fault weighting (0 = heavy, 1 = medium; 2 = light)
01... = sequential number The sorting of the error code is based on the serial number
03.1.00
A100 MFA, multifunction armrest
unknown MFA fault (error in the software)
03.1.01
A100 MFA, multifunction armrest
Faulty hardware (e.g. RAM or flash)
Function non-operable
03.1.02
A100 MFA, multifunction armrest
Incorrect checksum for the first 128 bytes in EEPROM
Function non-operable EOL
programming
03.1.03
A100 MFA, multifunction armrest
Software error Function non-operable EOL
programming
03.1.06
A100 MFA, multifunction armrest
Invalid parameters for voltage monitoring
EOL programming
03.1.07
A100 MFA, multifunction armrest
Invalid parameters for LIN bus diagnostics in EEPROM
Function non-operable EOL
programming
03.1.08
A100 MFA, multifunction armrest
Invalid parameters for flashing in EEPROM
EOL programming
03.1.09
A100 MFA, multifunction armrest
Invalid parameters for brightness setting in the EEPROM
EOL programming
03.1.0D
A100 MFA, multifunction armrest
Faulty PCB voltage (3.3 V)
3. Faults and remedy
Maintenance 139
530.020.020.011 Rev.A

AGCO FENDT 1038 Vario S4 Specifications

General

Brand	AGCO
Model	FENDT 1038 Vario S4
Category	Tractor
Language	English