AGCO FENDT 1038 Vario S4 User Manual

3.3.11 Fault code 0B.1.00 -
Fault code DIN brief description Cause Consequences Remedy
0B = TeachIn 0, 1, 2 = fault weighting (0 = heavy, 1 = medium; 2 = light)
01... = sequential number The sorting of the error code is based on the serial number
0B.2.00
A050 basic control unit ECU
TeachIn
Warning message when engine speed < 400 for sequence start at TeachIn
0B.2.01
A050 basic control unit ECU TeachIn
Warning message on cancel due to seat switch no longer being pressed
0B.2.02
A050 basic control unit ECU TeachIn
Warning message if speed is too high at the start of a sequence
0B.2.03
A050 basic control unit ECU TeachIn
Warning message if speed is too low at the start of a sequence
0B.1.14
S053 driver presence seat switch
Seat switch faulty (Fault code is output by the "TeachIn" function)
TI no longer allows playback of a sequence
0B.1.21
A050 basic control unit ECU
TeachIn
Internal communication error
0B.1.22
A050 basic control unit ECU A103 NT01/02 terminal TeachIn
Communication error between terminal and TeachIn
0B.1.23
A050 basic control unit ECU A100 MFA, multifunction armrest
Communication error between MFA and
TeachIn
3. Faults and remedy
186 Maintenance
530.020.020.011 Rev.A

AGCO FENDT 1038 Vario S4 Specifications

General

Brand	AGCO
Model	FENDT 1038 Vario S4
Category	Tractor
Language	English