3.3.21 Fault code 1F.1.00 -
Fault code DIN brief description Cause Consequences Remedy
1F = basic control unit (EXT)
0, 1, 2 = fault weighting (0 = heavy, 1 = medium; 2 = light)
01... = sequential number
The fault codes are sorted by serial number
1F.1.B0
A050 basic control unit ECU
GD request table is full, entry can
no longer occur,
failed to establish a communication
channel
1F.1.B1
A050 basic control unit ECU
GD request table is full, entry can
no longer occur,
failed to establish a communication
channel
1F.2.C0
A050 basic control unit ECU
Advance warning: GD request table
has reached defined level
1F.2.C1
A050 basic control unit ECU
Advance warning: GD request table
has reached defined level
3. Faults and remedy
Maintenance 227
530.020.020.011 Rev.A
To Next Page
Loading...
Need help?
General