AGCO FENDT 1038 Vario S4 User Manual

3.3.12 Fault code 0D.1.00 -
Fault code
DIN brief description Cause Consequences Remedy
0D = VarioDoc 0, 1, 2 = fault weighting (0 = heavy, 1 = medium; 2 = light)
01... = sequential number The sorting of the error code is based on the serial number
0D.1.00
A101 VarioDoc ECU
Unknown fault Restart system
0D.1.01
A103 NT01/02 terminal
CAN bus error (internal) Possible system failure
0D.1.02
A103 NT01/02 terminal
Serial connection cannot be established to the GSM modem GSM transfer not possible,
Internal serial interface module not responding to internal GSM modem
0D.1.03
A103 NT01/02 terminal
K BUS fault, K BUS CAN buffer (CAN 1) full: Possible break in the wiring, loose contact or short circuit
Possible system failure
0D.1.05
A103 NT01/02 terminal
Excess temperature, Internal temperature of control unit above 80°C
Possible system failure
0D.1.06
A101 VarioDoc ECU
Overvoltage, Input voltage over 20 V
Possible system failure
0D.1.07
A101 VarioDoc ECU
Overcurrent, Current input above 1 A
Possible internal short circuit
0D.1.08
A101 VarioDoc ECU
Error with GPS receiver power supply, Short circuit in GPS receiver power supply
Meaningful system operation not possible
3. Faults and remedy
190 Maintenance
530.020.020.011 Rev.A

AGCO FENDT 1038 Vario S4 Specifications

General

Brand	AGCO
Model	FENDT 1038 Vario S4
Category	Tractor
Language	English