AGCO FENDT 1038 Vario S4 User Manual

2.8.4 Change the oil in the front axle final drive hubs
Jack up the front axle
Procedure
Jack up the front axle until the wheels can turn freely.
2.8.4.1 Drain the oil
Procedure
1.
Turn the wheel until the hole is at the
bottom.
2.
Place the oil drip pan underneath.
3.
Loosen the oil drain plug and allow oil to
drain completely.
Fig. 40
2.8.4.2 Filling with oil
Procedure
1.
Turn the wheel until the hole is on the right and horizontal.
2.
Pour oil in through the filler hole until it overflows.
3.
Remove support stands and stand the vehicle on its wheels.
4.
Screw in the cleaned oil drain plug and tighten.
2. Service and maintenance
44 Maintenance
530.020.020.011 Rev.A

AGCO FENDT 1038 Vario S4 Specifications

General

Brand	AGCO
Model	FENDT 1038 Vario S4
Category	Tractor
Language	English