AGCO FENDT 1038 Vario S4 User Manual

3.3.8 Fault code 08.1.00 -
Fault code DIN brief description Cause Consequences Reference
08 = rear power lift (EPC) 0, 1, 2 = fault weighting (0 = heavy, 1 = medium; 2 = light)
01... = sequential number The sorting of the error code is based on the serial number
08.1.00
Y184 [HKH] rear power lift control valve
Unknown rear EPC fault
08.1.05
A050 basic control unit ECU
Checksums/equipment parameters incorrect
EOL programming
08.1.06
A050 basic control unit ECU
Checksums/control parameters incorrect
EOL programming
08.1.07
A050 basic control unit ECU
Checksums/WSB parameters incorrect
EOL programming
08.1.0A
A050 basic control unit ECU
Implausible configuration EOL
programming
08.1.22
B145 rear power lift position sensor
Sensor faulty,
Signal fault
No control possible, operable via external button only
Circuit diagram
8.5 V supply A150, fuse 37
08.1.23
A100 MFA, multifunction armrest
Rear power lift setpoint value potentiometer
Faulty setpoint value potentiometer
Signal fault
Setpoint values cannot be set Only position control possible
08.1.24
X015 external control socket
Faulty external sensor, No control possible,
3. Faults and remedy
Maintenance 165
530.020.020.011 Rev.A

AGCO FENDT 1038 Vario S4 Specifications

General

Brand	AGCO
Model	FENDT 1038 Vario S4
Category	Tractor
Language	English