2.1 General
2.1.1 General
WARNING:
Before any maintenance and repair work and before opening the engine cover, switch off
the engine. Remove the ignition key. Apply the hand brake and use a chock if necessary.
Ensure that the tractor is securely parked.
Disconnect the battery (negative terminal) before working on the engine.
Restore all safety equipment following maintenance work.
Ensure that the oil and fuel used are of the prescribed quality and store them both in
approved containers only. See also TECHNICAL DATA "Fluids and Lubricants".
Do not perform any welding, drilling, cutting or grinding work on the cab or safety frame.
Damaged parts must be replaced.
IMPORTANT:
Before carrying out any maintenance work, thoroughly clean the tractor. This is particularly important for
connections and components that need to be loosened and the surrounding areas. Used oil, coolant and
brake fluid must be disposed of properly. Current legislation and the instructions of the fluid manufacturer
must be observed.
Oil level checks must be conducted when the tractor is level and stationary; lock any front axle suspension.
For maintenance intervals, work to be performed and the quantity and quality of fuels and lubricants to be
used, refer to "Fluids and lubricants" or "Maintenance schedule".
2. Service and maintenance
Maintenance 21
530.020.020.011 Rev.A
To Next Page
Loading...
Need help?
General