AGCO FENDT 1038 Vario S4 User Manual

2.2 Engine cover and side panels
2.2.1 Open and close the engine cover
NOTE:
If the tractor has been fitted with a front power lift, remove top link.
Open the bonnet
1.
Release latch (A) (unlock with the ignition
key).
2.
Use handle (B) to raise the engine cover.
Fig. 1
Close the bonnet
3.
Swing the bonnet closed.
NOTE:
Check that the bonnet is correctly latched.
If the bonnet can be raised slightly, it is not
correctly latched
Raise the bonnet again and let it fall with a
little more force.
4.
Latch (A) can be locked again with the
ignition key.
2. Service and maintenance
22 Maintenance
530.020.020.011 Rev.A

AGCO FENDT 1038 Vario S4 Specifications

General

Brand	AGCO
Model	FENDT 1038 Vario S4
Category	Tractor
Language	English