Agilent Technologies 33250A Service Guide

78
Chapter 4 Calibration Procedures
AC Amplitude (high-impedance) Adjustment
4
AC Amplitude (high-impedance) Adjustment
The function generator stores a calibration constant for each high-
impedance attenuator path. The gain coefficient of each path is
calculated using two measurements; one with the waveform DAC at the
+ output and one with waveform DAC at the – output. The setups,
therefore, must be performed in pairs.
1 Connect the DMM as shown below.

Agilent Technologies 33250A Specifications

General

Brand	Agilent Technologies
Model	33250A
Category	Inverter
Language	English