Rockwell Automation Publication 2094-UM001J-EN-P - March 2017 181
Chapter 8
Remove and Replace the Kinetix 6000
Drive Modules
This chapter provides remove and replace procedures for your Kinetix® 6000
drive system components.
Before You Begin
These tools are required before you begin removal and replacement
procedures:
• Screwdriver, 3.5 mm (0.14 in.)
•Voltmeter
Topic Page
Before You Begin 181
Remove Kinetix 6000 Drive Modules 182
Replace Kinetix 6000 Drive Modules 183
Remove the Power Rail 184
Replace the Power Rail 185
ATTENTION: This drive contains electrostatic discharge (ESD) sensitive parts
and assemblies. You are required to follow static-control precautions when
you install, test, service, or repair this assembly. If you do not follow ESD
control procedures, components can be damaged. If you are not familiar with
static control procedures, refer to Guarding Against Electrostatic Damage,
publication 8000-4.5.2
, or any other applicable ESD awareness handbook.
To Next Page
Loading...
Need help?
General
