Rockwell Automation Publication MOTION-RM003I-EN-P - February 2018 235
The Converter Rated Output Power attribute is the drive converter output power
rating. This value is determined by the motion axis from the associated converter.
See also
Drive Output Attributes on page 251
Power and Thermal Management Configuration Attributes on page 252
These are the attributes that provide useful statistics on motion axis operation.
Control Power-up Time
Usage Access T Data
Type
Default Min Max Semantics of value
Optional - BD MSG
REAL - - - Seconds
Elapsed time since axis control power was last applied.
Cumulative Run Time
Usage Access T Data
Type
Default Min Max Semantics of value
Optional - BD MSG
REAL - - - Hours
Accumulated time that the axis has been powering the Running state.
Cumulative Energy Usage
Usage Access T Data
Type
Default Min Max Semantics of value
Optional - BD MSG
REAL - - - Kilowatt Hours
Accumulated output energy of the axis.
Cumulative Motor Rev
Usage Access T Data
Type
Default Min Max Semantics of value
Optional - D MSG
LINT - - -
Cumulative number of times motor shaft has turned. (Rotary Motors Only).
Cumulative Main Power Cycles
Usage Access T Data
Type
Default Min Max Semantics of value
Optional - BD MSG
DINT - - -
Axis Statistical Attributes