FlexiROC T30 R 4 General Machine Condition
15 No: 3629357835.1.3629419915 en-US
4 General Machine Condition
4.1 Wash Machine Externally
Disconnect fire-fighting equipment if steam washing or high-pressure washing.
n
Rinse the machine with water at least once a day to remove drill cuttings, mud, and
dirt.
The feed, front part of the boom, and track frames are particularly important to keep clean.
4.2 Check Condition of Signs
n Make sure all signs are in place.
n Make sure all signs are intact, clean and fully readable.
n Always replace defect or missing signs.