FlexiROC T30 R 13 Electrical System
92 No: 3629357835.1.3629419915 en-US
13.2 Check Condition of Electrical System
n
Check sealing strip damages on the electric cabinet.
n
Check corrosion and tightening on the connection blocks.
13.3 Check the Battery
n
Check electrolyte level in batteries (A).
13.4 Battery Charging
The battery is normally charged by the alternator and as well when the main power supply
of the machine is on. If the battery is fully discharged for some reason, it must be
recharged using a battery charger. Cell plugs must be loosened and left in the holes during
charging. Batteries contain corrosive fluid. Always turn off the charge current before dis-
connecting the clips. If the density has not risen noticeably despite some hours of charging,