Atlas Copco FlexiROC T30 R Maintenance

FlexiROC T30 R 7 Feed Unit
34 No: 3629357835.1.3629419915 en-US
!
NOTE: The (SP) measurement is noted before disassembling and is also specified in
the Spare Parts Catalog.
1.
Assemble the bushing and the bolts (B).
Do not tighten the bolts (B).
2.
Install the spacer and bushing into the sleeve and make sure spacer measurement
(SP) is as noted before disassembling.
3.
Tightening the bolts (B) in circles from 1 to 8 until the bolts set.
4.
Install the plastic plugs (A).
Tightening Torque
38 Nm (28 lb-ft)
7.10.3 Storing Feed for Longer Period of Down-Time
1.
Clean the feeder thoroughly.
2.
Lubricate as directed.
3.
Protect unpainted surfaces with corrosion inhibitor.
4.
Store the feeder in a dry and clean environment.

Atlas Copco FlexiROC T30 R Specifications

General

Brand	Atlas Copco
Model	FlexiROC T30 R
Category	Construction Equipment
Language	English