Atlas Copco FlexiROC T30 R Maintenance

FlexiROC T30 R 8 Drilling System
52 No: 3629357835.1.3629419915 en-US
3.
Read the feed pressure on pressure gauge (D).
8.4 Adjusting Rotation Speed
!
NOTE: Rotation speed can be set without drilling taking place.
Precondition
p
The hydraulic oil must be at operating temperature, normally 40 °C (104 °C).
1.
Activate the rotation speed by pressing button on the operator panel.

Atlas Copco FlexiROC T30 R Specifications

General

Brand	Atlas Copco
Model	FlexiROC T30 R
Category	Construction Equipment
Language	English