FlexiROC T30 R 1 Introduction
9 No: 3629357835.1.3629419915 en-US
1 Introduction
1.1 Safety First
Always read the information in the Safety manual before starting to use the machine or
starting maintenance work.
1.2 The Purpose of This Publication
The objective of these maintenance instructions is to detect and rectify faults at an early
stage so that breakdowns, costly secondary damage and accidents can be prevented.
Regular maintenance is a precondition for planning necessary interruptions in operation
such as reconditioning and repairs. This allows maintenance to be carried out when most
suitable with regard to production instead of causing complete breakdown.
1.3 Target Group
The information in this publication is intended for everyone involved in the application, op-
eration, and maintenance of the machine and related equipment. All readers are expected
to possess basic competence regarding mining methods, construction methods, and the
machines used for that kind of operation.
1.4 Product Warranty
The product warranty relies on correct use, maintenance, and repair of the machine and its
components at all times.
n Use only Atlas Copco original parts. Any damage or operational interruptions caused
by using spare parts of other manufactures than Atlas Copco will not be covered by
warranty.
n Atlas Copco is not liable for any damage caused by unauthorized modification to the
machine and its equipment.
n Atlas Copco is not liable for damage caused by inappropriate use.
n Overloading the machine can result in damage to the structure which is not noticed
during normal usage. Such damage is not covered by the warranty.
n Damage that occurs as a result of inadequate maintenance, substandard repairs, or
damage to equipment that is attributable to older unrepaired damage, is not covered
by the warranty.
n Read Atlas Copco policy warranty.
To Next Page
Loading...
Need help?
General
