Brother Innov-is 2500D User Manual

ADJUSTMENTS DURING THE EMBROIDERY PROCESS
150
■ If the Upper Thread Is Too Tight
The upper thread is too tight when the bobbin
thread is visible from the right side of the fabric.
a
Press .
b
Press in the tension display.
* Each press of the key decreases the value and
weakens the upper thread tension.
c
Press .
■ If the Upper Thread Is Too Loose
The upper thread is too loose when there are loose
thread locks or when loops appear on the right side
of the fabric.
a
Press .
b
Press in the tension display.
* Each press of the key increases the value and
tightens the upper thread tension.
c
Press .
Automatic Thread Cutting (End Color
Trim)
If the automatic thread cutting setting is selected, the
machine will automatically cut the thread at the end of
each color step sewn. To cancel the setting, press
, and then press again so that it appears as
.
Right side of fabric Wrong side of fabric
Right side of fabric Wrong side of fabric

Brother Innov-is 2500D Specifications

General

Built-in Embroidery Designs	136
Automatic Needle Threader	Yes
Thread Cutter	Automatic
USB Port	Yes
Maximum Sewing Speed	850 stitches per minute
Type	Sewing and Embroidery
LCD Screen	Yes
Bobbin Winding System	Automatic