ADJUSTING STITCH SETTINGS
Sewing Basics
45
2
Adjusting the Thread Tension
The default thread tension, which is automatically set,
can normally be used regardless of the type of thread or
fabric being sewn. However, with some fabric and
thread combinations, the thread tension may need to be
adjusted.
■ Correct Thread Tension
The upper thread and the bobbin thread should
cross near the center of the fabric. If the thread
tension is incorrectly set, the seam may have a poor
finish or the fabric may pucker.
a Wrong side of fabric
b Surface of fabric
c Upper thread
d Bobbin thread
■ Upper Thread Is Too Tight
If the bobbin thread can be seen on the surface of
the fabric, press . Each press of the key reduces
the setting and makes the thread tension looser.
a Surface of fabric
b Upper thread
c Bobbin thread
d Locks appear on the surface of the fabric.
■ Upper Thread Is Too Loose
If the upper thread can be seen on the wrong side of
the fabric, press . Each press of the key increases
the setting and makes the thread tension tighter.
a Wrong side of fabric
b Locks appear on the wrong side of the fabric.
c Upper thread
d Bobbin thread
Press to return the setting to its default.
Memo
If the upper thread is not threaded correctly or the
bobbin is not set correctly, the correct thread tension
cannot be set. If the correct thread tension cannot be
achieved, rethread the upper thread and reset the
bobbin correctly.
a
b
c
d
a
b
c
d
a
b
c
d
To Next Page
Loading...
Need help?
General
