AVAILABLE EDITING FUNCTIONS
166
AVAILABLE EDITING FUNCTIONS
With the Embroidery Edit functions, you can change the size of patterns, rotate patterns, adjust the character spacing
and layout, and perform many other editing operations. In addition, characters and patterns can be combined and
rearranged within the 26 cm × 16 cm (approx. 10 - 1/4 inches × 6 - 1/4 inches) embroidering area. With the
Embroidery Edit functions, you can combine various patterns and characters to create original patches and
embroidery.
■ Combined Patterns
You can easily create combinations of one-point patterns, frame patterns, character patterns, and patterns from
separately sold embroidery cards.
■ Move Patterns
Within the 26 cm
× 16 cm (approx. 10 - 1/4 inches × 6 - 1/4 inches) embroidery area, you can change the
position of patterns, and check their position on the LCD.
■ Rotate Patterns
You can rotate patterns one degree, 10 degrees or 90 degrees at a time.
■ Enlarge or Reduce Patterns
You can make patterns larger or smaller.
• This function is not available with some patterns.
■ Create Mirror Images
You can create horizontal mirror images of patterns.
• This function is not available with some patterns.
■ Change Character Spacing
You can increase or decrease the spacing between characters in combined patterns.
■ Change Character Appearance/Layout
You can change the layout of the characters to a curved line, a diagonal line, or any of the 6 choices available.
To Next Page
Loading...
Need help?
General
