LCD SCREEN
22
Using the Machine Operation Mode Key
Basic machine operations and other information based on the contents of this Operation Manual are stored in this
machine.
Press to open the screen shown below. Six categories are displayed at the top of the screen. Press a key to
see more information about that category.
■ Contents of Each Category
Names of Machine Parts and Their Functions Sewing Basics Troubleshooting
Presser foot lever
Sewing speed controller
Handwheel
Feed dog position switch
Flat bed attachment with
accessory compartment
Knee lifter
Foot controller
Upper threading
Bobbin winding
Changing the needle
Changing the presser foot
Setting the bobbin
Main Buttons Basic Embroidering Operations Maintenance
“Thread Cutter” button
“Presser Foot Lifter” button
“Start/Stop” button
“Reverse/Reinforcement Stitch”
button
“Needle Position” button
Attaching iron-on stabilizers
(backing) to the fabric
Inserting the fabric
Attaching & removing the
embroidery frame
Attaching the embroidery unit
Attaching embroidery foot
“U”
Correct stabilizer to use
Cleaning the race and bobbin
case
To Next Page
Loading...
Need help?
General
