Brother Innov-is 2500D User Manual

USING THE MEMORY FUNCTION
160
Retrieving Embroidery Patterns from
the Computer
a
Plug the USB cable connectors into the
corresponding USB port connectors on the
computer and on the machine (see page 157).
b
The “Removable Disk” icon appears in “My
Computer” on the computer.
c
Copy the pattern data to “Removable Disk”.
→ Pattern data in “Removable Disk” is written to the
machine.
d
Press .
→ The pattern selection screen appears.
e
Select an embroidery pattern to be retrieved.
* If you decide not to retrieve the pattern, press
.
a PHC data
b PES data
c Large-size embroidery pattern data
d DST data
e Total amount of “Removable Disk” memory available
for saving patterns
Note
• While data is being written, do not disconnect the
USB cable.
• Do not create folders within “Removable Disk”.
Since folders are not displayed, pattern data within
folders cannot be retrieved.
• While the machine is sewing, do not write data to or
delete data from “Removable Disk”.
Memo
• For details on large-size embroidery patterns, refer
to PE-DESIGN Instruction Manual.
e
a
b
d
c

Brother Innov-is 2500D Specifications

General

Built-in Embroidery Designs	136
Automatic Needle Threader	Yes
Thread Cutter	Automatic
USB Port	Yes
Maximum Sewing Speed	850 stitches per minute
Type	Sewing and Embroidery
LCD Screen	Yes
Bobbin Winding System	Automatic