63
Shutter Speed
Changing the Shutter Speed Mode and Value
1 Open the shutter [Mode] submenu.
[~ Camera Setup] > [Shutter] > [Mode]
2 Select the desired mode and then press SET.
• If you selected [Speed] (the default value) you can select the
increment scale to use when adjusting the shutter speed; otherwise,
skip to step 5.
3 Open the [Shutter Increment] submenu.
[~ Camera Setup] > [Shutter] > [Shutter Increment]
4 Select [1/3 stop] or [1/4 stop] and then press SET.
5 Adjust the shutter speed, angle value or clear scan frequency
using the direct setting mode.
• Repeatedly press the FUNC. button to highlight the shutter speed
display, select the desired value and then press SET. For details refer
to
Using the Direct Setting Mode
(A 61).
NOTES
• If you set an assignable button to [FUNC. Shutter] (A 111), you can
press the button to enter the direct setting mode with the shutter speed
highlighted and ready to be adjusted.
Remote Operation Using Wi-Fi Remote
After completing the necessary preparations (A 49), you can adjust the shutter speed remotely from a Wi-Fi-
enabled device using the Wi-Fi Remote application.
1 Press [SPEED] on the Wi-Fi Remote screen.
2 Select the desired mode.
3 Press the current shutter speed, angle value or clear scan frequency and select the desired value
from the list.
• You may need to scroll up/down to see all the available values.
• The selected value will be displayed on the Wi-Fi Remote screen and will be applied on the camcorder.
[~ Camera Setup]
[Shutter]
[Mode]
[Speed]
[~ Camera Setup]
[Shutter]
[Shutter Increment]
[1/4 stop]
To Next Page
Loading...
Need help?
General
Weight and Dimensions
