Name: Canon EOS C300
Brand: Canon
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Setting the User Bit

The user bit display can be selected from the date or the time of

recording, or an identification code consisting of 8 characters in the

hexadecimal system. There are sixteen possible characters: the numbers

0 to 9 and the letters A to F.

If user bit information is being received along with an external time code,

you can also record the external user bit on the recording media.

1 Open the user bit [Type] submenu.

[¤ TC/UB Setup] > [User Bit] > [Type]

2 Select the desired user bit type and press SET.

• Select [Setting] to set your own identification code, [Time] to use the time as user bit, or [Date] to use the

date as the user bit.

• If you selected [Time] or [Date], you do not need to perform the rest of the procedure. If you selected

[Setting], continue the procedure to set the identification code.

3 Select [Set] and then press SET.

• The user bit setting screen appears with an orange selection frame on the leftmost digit.

• To reset the user bit to [00 00 00 00], select [Reset] instead.

4 Use the joystick (Ý) or SELECT dial to select the first character and press SET to move to the next

digit.

• Change the rest of the digits in the same way.

• Press the CANCEL button to close the screen without setting the user bit.

5 Select [Set] and press SET to close the screen.

Operating modes:

[¤ TC/UB Setup]

[User Bit]

[Type]

[Setting]

COPY

Other manuals for Canon EOS C300

Questions and Answers:

Need help?

Do you have a question about the Canon EOS C300 and is the answer not in the manual?

General