!\dditional
information
Disposal
When you delete movies
or
initialize the
built-in memory
(1iHl
/
tml
/Im)
only) or memory card, only the file
allocation table is altered and stored
data is not physically erased. Take the
necessary precautions when you
dispose of the camcorder or memory
card, for example by physically
damaging it
to
prevent the leakage
of
private data.
liHl/tml/1m)
If giving the
camcorder
to
another person, initialize
the built-in memory using the
[COMPL.INIT.] setting
(OJ
32), fill it up
with unimportant recordings, and then
initialize it again using the same
method. This makes recovering the
original recordings very difficult.
Maintenance/Others
Cleaning
Camcorder
Body
• Use a soft, dry cloth
to
clean the
camcorder body. Never use
chemically treated cloths or volatile
solvents such
as
paint thinner.
Lens
If the lens surface is dirty, the autofocus
may not work properly.
• Remove any dust or dirt particles
using a non-aerosol type blower
brush.
• Use a clean, soft lens-cleaning cloth
to
gently wipe the lens. Never use
tissue paper.
LCD
SCreen
• Clean the LCD screen using a clean,
soft lens-cleaning cloth.
• Condensation may form on the
surface
of
the screen when the
temperature changes suddenly. Wipe
it with a soft dry cloth.
Condensation
Moving the camcorder rapidly between
hot and cold temperatures may cause
condensation (water droplets)
to
form
on its internal surfaces. Stop using the
camcorder if condensation is detected.
Continued use may damage the
camcorder.
108
---------------------------
To Next Page
Loading...
Need help?
General
Weight and Dimensions
