Joystick
and
Joystick
Guide
Preparations
You
can access the menus and change
settings
to
your preference.
Even
in
flexible recording mode, the camcorder
can help you with the settings. For
example, you can use the Special
Scene recording programs
(CD
44)
to
set at once
all
the optimal settings to
match special recording conditions.
Playback
Press
·~~IB
to switch between the
recording mode indicated by the
camera mode dial and playback mode
((iH)
/
1m)
/
(DID
the selected
media will remain the same). When the
camera mode dial is set
to
•
.,
or liJ,
pressing
·~~IB
switches the
camcorder
to
movie playback mode.
When the camera mode dial
is
set
to
Q , pressing
·~~IB
switches the
camcorder
to
photo playback mode.
Even
if the camcorder is turned off,
pressing
·~~IB
will start the camcorder
in
the corresponding playback mode.
eu
NOTES
_
In
[!.p2J
mode
you
cannot access the
menus
or joystick guide but
you
can
change the following settings
in
advance,
before setting
the
camcorder to
[i~+1
mode.
- Recording mode of movies
- Size/quality of photos
- Widescreen
- Auto slow shutter
-
All
settings
in
the
[~SYSTEM
SETUP]
menu
-
LCD
screen
dimmer
-
Demo
mode
-
Image
stabilizer
26
Use the joystick
to
operate the
camcorder's menus.
Push the joystick up, down, left or right
(AT,
....
~)
to
select
an
item or change
settings.
Press the joystick itself (
@)
to
save the
settings
or
confirm
an
action.
On
menu
screens, this is indicated by the icon
(iii)·
The functions that appear
in
the joystick
guide depend on the operating mode.
By default, the joystick guide
is
minimized. Push the joystick (A)
to
display it.
During
1'.':1
or
10,':1
mode, select
(.A.T)
a function and press @
to
change the
setting. With some functions, you will
need
to
make further adjustments
(indicated by small arrows).
During playback mode, select
(.A.T)
a
"row"
of
functions and press @
to
operate the function
in
the middle or
push the joystick (
....
~)
to
operate the
function on the left
or
right side of the
row, respectively.