Interrupt Mode
1-42
1
Introduction to the Copying Functions
Interrupt Mode
This mode enables you to Interrupt the current job or a reserved job to make priority copies.
This mode is useful if you need to make a rush copy during a long copy job.
NOTE
You can make interrupt copies whenever the machine is ready to scan.
1
Press .
If you want to make copies after changing the Department ID while Department ID
Management is enabled, press ➞ enter the Department ID and password using -
(numeric keys). (See Chapter 2, "Basic Operations," in the Reference Guide.)
NOTE
The current job does not stop printing immediately after you press . Printing of the current job
stops only when the actual printing of the priority or interrupt copy starts.
2
Place your originals ➞ set the desired copy modes.
NOTE
•
To cancel the Interrupt mode, press .
•
To cancel previously set copy modes, press . (The Interrupt mode itself is not cancelled.)
To Next Page
Loading...
Need help?
General
