RM23712 TPS
14
Surge Non-
operating
and opera
ting
ACLeads 2.0 kV
I/O Leads 1.0 kV
DCLeads 0.5 kV
Acoustics
Sound Power
Measured
Servers/Rack
Mount Sound
Power
Level (in BA)
2.10 System Packaging
The original Chenbro packaging, in which the server system is delivered, is designed to provide
protection to a fully configured system and was tested to meet ISTA (International Safe Transit
Association) Test Procedure 3A (2008). The packaging was also designed to be re-used for
shipment after system integration has been completed.
The original packaging includes – a small inner box for ship along accessories, the outer shipping
main box, and various protective inner packaging components. The boxes and packaging
components are designed to function together as a protective packaging system. When reused, all
of the original packaging material must be used, including both boxes and each inner packaging
component. In addition, all inner packaging components MUST be reinstalled in the proper location
to ensure adequate protection of the system for subsequent shipment.
NOTE: The design of the inner packaging components does not prevent improper placement
within the packaging assembly. There is only one correct packaging assembly that will allow the
package to meet the ISTA (International Safe Transit Association) Test Procedure 3A (2008)
limits.
Failure to follow the specified packaging assembly instructions may result in damage to the
system during shipment.
2.10.1 RM23712 Weight Information
Table 6. RM23712 Weight Information
NOTE: An L6 system does not include processors, memory, drives, or add-in cards. It is the
system configuration as shipped from Chenbro. Integrated system weights (System configurations
that include the items above) will vary depending on the final system configuration. For the 2U
product, a fully integrated un-packaged system can weigh up to 65 Lbs. (29.5Kg).
To Next Page
Loading...
Need help?
General