EasyManuals Logo
Home>Chenbro>Racks & Stands>RM23712

Chenbro RM23712 User Manual

Default Icon
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
RM23712 TPS
43
The power supply shall comply with EN55024.
The power supply when installed in the system must meet the following all the immunity
requirements when integrated into the end system.
3.6.9 Magnetic Leakage Fields
The PFC choke magnetic leakage field shall not cause any interference with a high resolution
computer monitor placed next to or on top of the chassis.
3.6.10 Voltage Fluctuations and Flicker
The power supply shall meet the specified limits of EN61000-3-3, for voltage fluctuations and flicker
for equipment 16 amps connected to low voltage distribution systems.
3.7 Reliability / Warranty / Service
3.7.1 Mean Time between Failures (MTBF)
The power supply shall have a minimum MTBF at continuous operation of 200,000 hours calculated
at 100%,according to BELL CORE TR-322 at 25°C excluding the Fan MTBF, and at least 100,000
hours including the fan MTBF.
3.7.2 Warranty
The Warranty for the power supply is 36 months (three years) from production date code.
3.7.3 Serviceability
No troubleshooting by maintenance personnel is to be performed. Units shall be returned to FSP
Power for any troubleshooting, unless agreed by both parties.
The power supply will lose warranty if opened other than FSP service personal or agreed by both
parties.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Chenbro RM23712 and is the answer not in the manual?

Chenbro RM23712 Specifications

General IconGeneral
BrandChenbro
ModelRM23712
CategoryRacks & Stands
LanguageEnglish