Cisco CRS-1 - Carrier Routing System Router Troubleshooting Guide

3-95
Cisco IOS XR Troubleshooting Guide for the Cisco CRS-1 Router
OL-21483-02
Chapter 3 Troubleshooting Forwarding
Troubleshooting the Interface Manager
FABRIC QOS ENABLE FLAG: 0
--------------------------------------------------------------------------
Location = 0/6/CPU0
Index = 0
Pse direction = EGRESS
Global general 16 bytes:
------------------------
ROUTER_ID: 45.104.151.108
MINIMUM MASK DESTINATION: 0 / 0
MINIMUM MASK SOURCE: 0 / 0
BYTES OF SNIFF PACKET: 0
SUPPRESS PUNT ACL: 0
MPLS PROPAGATE TTL FLAG: 1
PARITY: 0
IPV4 PREFIX ACCNTG: 0
--------------------------------------------------------------------------
Location = 0/6/CPU0
Ifname/Ifhandle = GigabitEthernet0_6_5_0
Index = 1
Pse direction = INGRESS
General 16 bytes:
-----------------
IFHANDLE: 0x168002
STATUS: 0
IPV4 ENABLE: 0
IPV6 ENABLE: 0
MPLS ENABLE: 0
STATS POINTER: 0x2c400
SPRAYER QUEUE: 32
IPV4 MULTICAST: 0
IPV6 MULTICAST: 0
USE TABLE ID IPV4: 0
USE TABLE ID IPV6: 0
USE TABLE ID MPLS: 0
TABLE ID: 0
QOS ENABLE: 0
QOS ID: 0
NETFLOW SAMPLING PERIOD: 0
L2 PKT DROP: 0
L2 QOS ENABLE: 0
SRC FWDING: 0
*BUNDLE IFHANDLE: 0
*TUNNEL IFHANDLE: 0
*L2 ENCAP: 3
* Not programmed in hardware
.
.
.
Troubleshooting the Interface Manager
These sections describe how to troubleshoot the interface manager (IM):
• Interface Manager Control Process, page 3-96
• Troubleshooting the Trace Logs for the Interface Manager, page 3-100
• Troubleshooting the Client for the Interface Manager, page 3-101

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English