EasyManuals Logo
Home>Cisco>Network Router>CRS-1 - Carrier Routing System Router

Cisco CRS-1 - Carrier Routing System Router Troubleshooting Guide

Cisco CRS-1 - Carrier Routing System Router
264 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #186 background imageLoading...
Page #186 background image
8-176
Cisco IOS XR Troubleshooting Guide for the Cisco CRS-1 Router
OL-21483-02
Chapter 8 Process Monitoring and Troubleshooting
show processes Commands
Band Name Finished %Idle JID Ready Last Process
----- -------------- -------- -------- -------- ------- ---------------------
1.0 MBI 22.830 65.130% 62 22.830 insthelper
40.0 ARB 129.225 92.080% 154 106.395 dsc
90.0 ADMIN 185.140 5.950% 175 55.915 fabricq_mgr
100.0 INFRA 207.372 25.040% 165 22.232 fib_mgr
150.0 STANDBY 231.605 13.840% 104 24.233 arp
999.0 FINAL 237.942 1.590% 234 6.337 ipv6_rump
Started Level JID Inst Ready Process
--------- ------ -------- ---- ------- -------------------------------
0.000s 0.05 80 1 0.000 wd-mbi
0.000s 1.00 57 1 0.000 dllmgr
0.000s 2.00 71 1 0.000 pkgfs
0.000s 3.00 56 1 0.000 devc-conaux
0.000s 3.00 73 1 0.000 devc-pty
0.000s 6.00 70 1 0.000 pipe
.
.
.
Last process started: 6d19h after boot. Total: 174
show processes startup Command
The show processes startup command displays process data for processes created at startup. Use the
command output to check the following:
• Are the listed processes, including their state, start time, restart status, placement, and mandatory
status as expected
• How long it took the processes to start
• The order in which the processes started
• Was a process delayed indicating a boot failure or boot problems
• Did the processes start within the time constraints set by the system
RP/0/RP0/CPU0:router# show processes startup
JID LAST STARTED STATE RE- PLACE- MANDA- NAME(IID) ARGS
START MENT TORY
-------------------------------------------------------------------------------
81 07/05/2006 14:46:37.514 Run 1 M wd-mbi(1)
57 07/05/2006 14:46:37.514 Run 1 M dllmgr(1) -r 60
-u 30
72 07/05/2006 14:46:37.514 Run 1 M pkgfs(1)
56 07/05/2006 14:46:37.514 Run 1 M devc-conaux(1) -
h -d librs232.dll -m libconaux.dll -u libst16550.dll
74 07/05/2006 14:46:37.514 Run 1 M devc-pty(1) -n 3
2
55 Not configured None 0 M clock_chip(1) -r
-b
71 07/05/2006 14:46:37.514 Run 1 M pipe(1)
65 07/05/2006 14:46:37.514 Run 1 M mqueue(1)
64 Not configured None 0 M cat(1) /etc/motd
73 Not configured None 0 M platform_dllmap(
1)
77 07/05/2006 14:46:37.514 Run 1 M shmwin_svr(1)
60 07/05/2006 14:46:37.514 Run 1 M devf-scrp(1) -e
0xf0000038 -m /bootflash: -s 0xfc000000,64m -r -t4 -b10

Table of Contents

Other manuals for Cisco CRS-1 - Carrier Routing System Router

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco CRS-1 - Carrier Routing System Router and is the answer not in the manual?

Cisco CRS-1 - Carrier Routing System Router Specifications

General IconGeneral
BrandCisco
ModelCRS-1 - Carrier Routing System Router
CategoryNetwork Router
LanguageEnglish

Related product manuals