Cisco CRS-1 - Carrier Routing System Router Troubleshooting Guide

1-67
Cisco IOS XR Troubleshooting Guide for the Cisco CRS-1 Router
OL-21483-02
Chapter 1 General Troubleshooting
Monitoring
• monitor processes Command, page 1-69
• monitor threads Command, page 1-70
monitor interface Command
Use the monitor interface command to monitor interface counters. The following example shows the
output of the monitor interface command.
Note The Cisco IOS XR Manageability Package is required to use the monitor interface command.
The following example shows the output of the monitor interface command with a specified interface.
RP/0/RP0/CPU0:router# monitor interface tenGigE 0/3/0/7
CRS-A_IOX Monitor Time: 00:00:08 SysUptime: 118:58:20
TenGigE0/3/0/7 is up, line protocol is up
Encapsulation ARPA
Traffic Stats:(2 second rates) Delta
Input Packets: 1466462 4
Input pps: 1
Input Bytes: 379782697 1730
Input Kbps (rate): 6 ( 0%)
Output Packets: 2403444 2
Output pps: 0
Output Bytes: 269350468 140
Output Kbps (rate): 0 ( 0%)
Errors Stats:
Input Total: 2 0
Input CRC: 0 0
Input Frame: 0 0
Input Overrun: 0 0
Output Total: 0 0
Output Underrun: 0 0
Quit='q', Freeze='f', Thaw='t', Clear='c', Interface='i',
Next='n', Prev='p'
Brief='b', Detail='d', Protocol(IPv4/IPv6)='r'
The following example shows the output of the monitor interface command.
RP/0/RP0/CPU0:router# monitor interface
CRS-A_IOX Monitor Time: 00:00:08 SysUptime: 118:58:50
Interface In(bps) Out(bps) InBytes/Delta OutBytes/Delta
MgmtEth0/RP0/CPU0/0 45014/ 0% 52156/ 0% 3.9G/14686 842.2M/17016
Bundle-POS100 0/ --% 0/ --% 0/0 0/0
Bundle-POS101 0/ --% 0/ --% 0/0 0/0
MgmtEth0/RP1/CPU0/0 0/ 0% 0/ 0% 27.8M/0 1.8M/0
FINT0/RP1/CPU0 0/ 0% 0/ 0% 121.8M/0 3.5M/0
TenGigE0/3/0/0 0/ 0% 0/ 0% 0/0 0/0
TenGigE0/3/0/1 443/ 0% 683/ 0% 532.1M/144 744.4M/222
TenGigE0/3/0/2 0/ 0% 0/ 0% 0/0 0/0
TenGigE0/3/0/3 0/ 0% 0/ 0% 0/0 0/0

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English