Cisco CRS-1 - Carrier Routing System Router Troubleshooting Guide

5-145
Cisco IOS XR Troubleshooting Guide for the Cisco CRS-1 Router
OL-21483-02
Chapter 5 Troubleshooting Interfaces
Troubleshooting Common Issues with Bundle Interfaces
Step 3
show iir interfaces name bundle-name
Example:
RP/0/RP0/CPU0:router# show iir interfaces name
bundle-ether 202
Ensure that the member links are in ACTIVE state.
Step 4
show iir interfaces name bundle-name location
location-id
Example:
RP/0/RP0/CPU0:router# show iir interfaces name
bundle-ether 202 location 0/RP0/CPU0
Make sure the IIR database of Bundle Interface Information
is in sync.
Step 5
show pfi-ifh database bundle-name location
location-id
Example:
RP/0/RP0/CPU0:router# show pfi-ifh database
bundle-ether 205 location 0/1/CPU0
Make sure that the PFI-IFH database of bundle interface
info is in sync.
Step 6
show cef adajacency bundle-name hardware egress
detail location
location-id
Example:
RP/0/RP0/CPU0:router# show cef adjacency
bundle-name hardware egress detail location
0/RP0/CPU0
RP/0/RP0/CPU0:router# show cef adjacency
bundle-name hardware ingress remote detail
location 0/RP0/CPU0
Make sure that the TLU entries are allocated and bundle
adjacency info is properly programmed
Step 7
Contact Cisco Technical Support. For Cisco Technical Support contact information, see the
“Obtaining Documentation and Submitting a Service
Request” section on page viii in the Preface.
Command or Action Purpose

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English