5-142
Cisco IOS XR Troubleshooting Guide for the Cisco CRS-1 Router
OL-21483-02
Chapter 5 Troubleshooting Interfaces
Verifying and Troubleshooting Pluggable Optical Interfaces
CLEI: IPUIAG9RAA
SPA 0/6/4 device pluggable-optics 6/0 info:
int sonet 6/4/6:
State: Enabled
Environmental Information - raw values
Temperature: 41.47 C
Supply voltage: 32816 in units of 100uVolt
Tx bias: 0 in units of 2uAmp
Tx power: -40 dBm (0 in units of 0.1 uW)
Rx power: -18 dBm (142 in units of 0.1 uW)
Transceiver: Enabled
SW TX Fault: unavailable
SW LOS: unavailable
No active alarms
No active warnings
Version Identifier (VID): V01
Product Identifier (PID): SFP-OC12-MM
Part Number (PN): 10-2079-01
CLEI: IPUIAG9RAA
SPA 0/6/4 device pluggable-optics 7/0 info:
RP/0/RP0/CPU0:P1_CRS-8#
RP/0/RP0/CPU0:router#show hw-module subslot 0/6/4 errors pluggable-optics
SPA 0/6/4 device pluggable-optics 0/0 info:
SPA 0/6/4 device pluggable-optics 1/0 info:
SPA 0/6/4 device pluggable-optics 2/0 info:
SPA 0/6/4 device pluggable-optics 3/0 info:
SPA 0/6/4 device pluggable-optics 4/0 info:
int sonet 6/4/4:
Phased Initialization
Phase Reached: 4
Phase Exit Code: Success 0
Phase Read Offset: 256
Socket Verification
Compatibility: Compatibility passed
Security: Security passed
SPA 0/6/4 device pluggable-optics 5/0 info:
int sonet 6/4/5:
Phased Initialization
Phase Reached: 4
Phase Exit Code: Success 0
Phase Read Offset: 256
Socket Verification
Compatibility: Compatibility passed
Security: Security passed
SPA 0/6/4 device pluggable-optics 6/0 info:
int sonet 6/4/6:
Phased Initialization
Phase Reached: 4
Phase Exit Code: Success 0
Phase Read Offset: 256
Socket Verification
Compatibility: Compatibility passed
To Next Page
Need help?
General
