Cisco RV 120W Administration Guide

Administering Your Cisco RV 120W
Using Diagnostic Tools
Cisco RV 120W Administration Guide 130
7
To configure access control rules:
STEP 1 In the Access Control List Table, click Add.
STEP 2 Enter the IP Address of the specific SNMP manager or trap agent on which to
create an access rule.
STEP 3 Enter the subnet mask used to determine the list of allowed SNMP managers.
STEP 4 Enter the community string to which the agent belongs. Most agents are
configured to listen for traps in the Public community.
STEP 5 Choose the access type. The SNMP manager or trap agent can either be allowed
to read and modify all SNMP accessible settings (rwcommunity) or be given read-
only access (rocommunity).
STEP 6 Click Save.
Configuring Additional SNMP Information
To configure additional SNMP information:
STEP 1 Choose Administration > Network Management > SNMP System Information. This
page displays the current SNMP configuration of the router. The following MIB
(Management Information Base) fields are displayed and can be modified:
• SysContact—Enter the name of the contact person for this router. Examples:
admin, John Doe.
• SysLocation—Enter the physical location of the router. Example: Rack #2,
4th Floor.
• SysName—Enter a name for easy identification of the router.
STEP 2 Click Save.
Using Diagnostic Tools
The Cisco RV 120W provides several diagnostic tools. To access these tools,
choose Administration > Network Tools.

Cisco RV 120W Specifications

General

Brand	Cisco
Model	RV 120W
Category	Network Router
Language	English