Cisco RV 120W Administration Guide

Administering Your Cisco RV 120W
Configuring Date and Time Settings
Cisco RV 120W Administration Guide 136
7
Configuring VLAN Associations
You can select the available VLAN to enable Bonjour service types. Available
VLANs are populated for the Bonjour Association VLAN list after the VLANs are
configured for the device. (See Configuring Virtual LANs (VLANs), page 39, for
more information.) Currently, by default, LAN/Default-VLAN is the broadcasting
domain for service.
Associating a VLAN allows devices present on the VLAN to discover Bonjour
services available on the router (such as http/https). For example, if a VLAN is
configured with an ID of 2, devices and hosts present on VLAN 2 cannot discover
Bonjour services running on the router unless VLAN 2 is associated with Bonjour
services.
To add a VLAN association:
STEP 1 Choose Administration > Discovery Settings > VLAN Association.
STEP 2 Click Add.
STEP 3 Choose an available VLAN to which to add a service. (See Configuring Virtual
LANs (VLANs), page 39 for more information.)
STEP 4 Click Save. The VLAN is added to the VLAN Association Table.
Configuring Date and Time Settings
You can configure your time zone, whether or not to adjust for Daylight Savings
Time, and with which Network Time Protocol (NTP) server to synchronize the date
and time. The router then gets its date and time information from the NTP server. To
configure NTP and time settings:
STEP 1 Choose Administration > Time Settings.
STEP 2 Select your time zone, relative to Greenwich Mean Time (GMT).
STEP 3 If supported for your region, check the Adjust for Daylight Savings Time box.
STEP 4 Select whether to use default or custom Network Time Protocol (NTP) servers, or
set the time and date manually.

Cisco RV 120W Specifications

General

Brand	Cisco
Model	RV 120W
Category	Network Router
Language	English