Cisco TelePresence SX20 User Manual

51
D1534504 User Guide
Cisco TelePresence
Produced: November 2016 for CE 8.2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.
Camera
View Camera Settings
Tap Camera to invoke the
camera adjustment menu.
Turn Selfview
On and O.
Maximize/minimize Selfview.
Zoom in and out.
Pan and tilt controls.
Any camera presets
dened will be listed
here.
About Camera Settings
The camera settings let you control
the zoom, pan and tilt of the camera
as well as dene and edit camera
position presets.
In addition selfview (the image that
the others see from your system)
can be turned on and o as well as
be shown minimized or maximized.
If the position of the selfview blocks
important parts of the image on your
screen, it can be moved. How to do
this is shown in “Move the Selfview
PiP” on page 60.
Pan
Tilt
Zoom

Cisco TelePresence SX20 Specifications

General

Digital zoom	5 x
Optical zoom	2.5 x
Aspect ratio	16:9
Supported video modes	1080p, 576p, 720p
Supported graphics resolutions	176 x 144, 352 x 288, 704 x 576, 720 x 480, 720 x 576, 1280 x 768, 1280 x 800, 1280 x 960, 1024 x 576 (WSVGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1360 x 768 (WXGA), 1920 x 1080 (HD 1080), 640 x 480 (VGA), 800 x 600 (SVGA)
Line-in	Yes
USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Ethernet LAN data rates	10, 100, 1000 Mbit/s
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	40 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Voice codecs	G.711, G.722, G.722.1

Weight and Dimensions

Depth	180 mm
Width	300 mm
Height	34 mm
Weight	1400 g