Cisco TelePresence SX20 User Manual

53
D1534504 User Guide
Cisco TelePresence
Produced: November 2016 for CE 8.2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.
Preset editing is all about taking an
existing preset, altering it and then
saving it under the same name.
If you want to change the name,
we recommend that you delete the
preset and create a new one with
the preferred name.
Edit Existing Camera Position Preset
About Preset Editing
Tap Camera to see the eects
of your camera adjustments.
Adjust Pan, Tilt and Zoom,
as required.
Tap the preset to be edited.
Selfview will be activated
automatically.
Tap the little arrowhead of
the preset to be edited.
Tap anywhere
outside the menu to
close it.
Camera
Tap Update to current
position to put your
changes into eect.
To delete an existing preset
tap Remove.
Pan
Tilt
Zoom

Cisco TelePresence SX20 Specifications

General

Digital zoom	5 x
Optical zoom	2.5 x
Aspect ratio	16:9
Supported video modes	1080p, 576p, 720p
Supported graphics resolutions	176 x 144, 352 x 288, 704 x 576, 720 x 480, 720 x 576, 1280 x 768, 1280 x 800, 1280 x 960, 1024 x 576 (WSVGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1360 x 768 (WXGA), 1920 x 1080 (HD 1080), 640 x 480 (VGA), 800 x 600 (SVGA)
Line-in	Yes
USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Ethernet LAN data rates	10, 100, 1000 Mbit/s
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	40 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Voice codecs	G.711, G.722, G.722.1

Weight and Dimensions

Depth	180 mm
Width	300 mm
Height	34 mm
Weight	1400 g