Cisco TelePresence SX20 User Manual

61
D1534504 User Guide
Cisco TelePresence
Produced: November 2016 for CE 8.2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.
Camera
Control the Camera of the Other Participant
Within video conferencing the term
far end is often used to refer to the
one you are talking to.
Likewise, the term near end is often
used to refer to your side of the
video meeting.
The ability to control the far end
camera requires that the far
end system camera is remotely
controllable. The feature cannot be
applied to systems with a manual
camera adjustment.
You will not have access to any
presets that may exist on the far end
video system.
About Camera Control
Adjust the camera’s pan,
zoom and tilt.
In a call, tap the avatar
representing the other
participant.
In a video conference with
several participants, tap
the avatar representing the
participant whose camera
you want to control.
Tap Camera.
Tap anywhere outside
the menu to exit.
Pan
Tilt
Zoom

Cisco TelePresence SX20 Specifications

General

Digital zoom	5 x
Optical zoom	2.5 x
Aspect ratio	16:9
Supported video modes	1080p, 576p, 720p
Supported graphics resolutions	176 x 144, 352 x 288, 704 x 576, 720 x 480, 720 x 576, 1280 x 768, 1280 x 800, 1280 x 960, 1024 x 576 (WSVGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1360 x 768 (WXGA), 1920 x 1080 (HD 1080), 640 x 480 (VGA), 800 x 600 (SVGA)
Line-in	Yes
USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Ethernet LAN data rates	10, 100, 1000 Mbit/s
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	40 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Voice codecs	G.711, G.722, G.722.1

Weight and Dimensions

Depth	180 mm
Width	300 mm
Height	34 mm
Weight	1400 g