5-20
Catalyst 3750 Switch Software Configuration Guide
78-16180-02
Chapter 5 Managing Switch Stacks
Displaying Switch Stack Information
Displaying Switch Stack Information
To display configuration changes that you save after you reset a specific stack member or the switch
stack, use the privileged EXEC commands listed in Table 5-4.
Table 5-4 Commands for Displaying Switch Stack Information
Command Description
show platform stack-manager all Displays all switch stack information.
show switch 'Displays summary information about the switch stack,
including the status of provisioned switches.
show switch stack-member-number Displays information about a specific member.
show switch detail Displays detailed information about the stack ring.
show switch neighbors Display the neighbors for the entire switch stack.
show switch stack-ports Displays port information for the entire switch stack.
show switch stack-ring activity
[detail]
Displays the number of frames per stack member that are sent
to the stack ring. Use the detail keyword to display the ASIC,
the receive queues, and the number of frames per stack
member that are sent to the stack ring.
To Next Page
Loading...
Need help?
General