Cisco XR 12000 User Manual

clear fabricq counters frfab
To clear the from fabric queue counters that are associated with the fabric queue driver, use the clear fabricq
counters frfab command in administration EXEC mode.
clear fabricq counters frfab [all| error| packet] location node-id
Syntax Description
(Optional) Clears all counters.all
(Optional) Clears error counters.error
(Optional) Clears packet counters.packet
Identifies the node whose fabric counters you want to clear. The node-id
argument is entered in the rack/slot/module notation.
location node-id
Command Default
All from fabric queue driver counters are cleared for the specified location
Command Modes
Administration EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
The fabric taskID was removed from this command.Release 3.5.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
readroot-system
Examples
The following example shows how to clear the from fabric queue counters for the location 0/1/CPU0:
RP/0/0/CPU0:router# admin
RP/0/0/CPU0:router(admin)# clear fabricq counters frfab location 0/1/CPU0
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
96 OL-30353-01
Fabric Management Commands
clear fabricq counters frfab

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English