Cisco XR 12000 User Manual

show controllers fabricq errors
To display the count of hardware errors associated with the fabric queue driver, use the show controllers
fabricq errorscommand in administration EXEC mode.
show controllers fabricq errors [location node-id]
Syntax Description
(Optional) Displays statistical information for the designated node. The node-id
argument is entered in the rack/slot/module notation.
location node-id
Command Default
Information about errors for all route processors (RPs) on the router is displayed
Command Modes
Administration EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Use the show controllers fabricq errors command to display statistics about hardware errors. Specifying
a location displays information only if that location is a RP.
The show controllers fabricq errorscommand is intended for use while performing debugging procedures.
Task ID
OperationsTask ID
read, writeroot-system
Examples
The following is sample output from the show controllers fabricq errorscommand for location 0/1/CPU0:
RP/0/0/CPU0:router# admin
RP/0/0/CPU0:router(admin)# show controllers fabricq errors location 0/1/CPU0
Location 0/1/0:
ToFab Errors:
Error Type Error Count Max Rate Rate Exceeded Count
-----------------------------------------------------------
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
106 OL-30353-01
Fabric Management Commands
show controllers fabricq errors

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English