Cisco XR 12000 User Manual

show sysdb trace verification location
To display trace verification information for the system database (SYSDB), use the show sysdb trace
verification location command in EXEC mode.
show sysdb trace verification location node-id
Syntax Description
Specific node. The node-id argument is entered in the rack/slot/module
notation.
node-id
Command Default
No default behavior or values
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Use the show sysdb trace verification shared-plane location command to display details of recent verification
sysDB transactions and changes on local plane configurations. The command output allows you to confirm
that configuration were verified and accepted.
Task ID
OperationsTask ID
readsysmgr
readcisco-support
Examples
The following example shows the output of the show sysdb trace verification shared-plane location
command. The output shows that changes to the SysDB local plane were verified and accepted.
RP/0/0/CPU0:router# show sysdb trace verification location 0/3/CPU0
Timestamp jid tid reg handle connid action
path
323 wrapping entries (4096 possible, 299 filtered, 622 total)
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
OL-30353-01 75
Troubleshooting Commands
show sysdb trace verification location

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English