Cisco XR 12000 User Manual

show uidb data
To display index data information for the micro-interface descriptor block (uIDB), use the show uidb
datacommand in EXEC mode.
show uidb data [shadow] [ingress| egress] [interface-type interface-instance] location node-id
Syntax Description
(Optional) Displays uIDB data from shadow copy Route Skill Mapping (RSM) instead
of Metro HW.
shadow
(Optional) Displays ingress PSE-related information.ingress
(Optional) Displays egress PSE-related information.egress
Interface type. For more information, use the question mark (?) online help function.
interface-type
Either a physical interface instance or a virtual interface instance as follows:
•
Physical interface instance. Naming notation is rack/slot/module/port and a slash
between values is required as part of the notation.
◦
rack: Chassis number of the rack.
◦
slot: Physical slot number of the modular services card or line card.
◦
module: Module number. A physical layer interface module (PLIM) is
always 0.
◦
port: Physical port number of the interface.
In references to a Management Ethernet interface located on a route
processor card, the physical slot number is alphanumeric (RP0 or RP1)
and the module is CPU0. Example: interface MgmtEth0/RP1/CPU0/0.
Note
•
Virtual interface instance. Number range varies depending on interface type.
For more information about the syntax for the router, use the question mark (?) online
help function.
interface-instance
Displays micro-IDB index data information for a specified node. The node-id
argument is entered in the rack/slot/module notation.
location node-id
Command Default
No default behavior or values
Command Modes
EXEC
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
OL-30353-01 83
Troubleshooting Commands
show uidb data

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English