Cisco XR 12000 User Manual

show critmon statistics
To display information about the critical monitor statistics, use the show critmon statistics command in
EXEC mode and in administration EXEC mode.
show critmon statistics {all| congestion| deadline client client-name| ticker| watcher} last hours location
{node-id| all}
Syntax Description
Displays all the information for the critical monitor.all
Displays all the CPU congestion information for the critical monitor.congestion
Displays all the statistics information for the deadline monitor.deadline
Displays information only for the specified client.client
Name of the client.
client-name
Displays the ticker statistics for the wd-critical-mon process.ticker
Displays the watcher statistics for the wd-critical-mon process.watcher
Displays only the last number of hours.last
Number of last hours. The range is from 1 to 24.hours
Specifies a node to filter.location
Node ID. The node-id argument is entered in the rack/slot/module notation.node-id
Specifies all locations.all
Command Default
No default behavior or values
Command Modes
EXEC
Administration EXEC
Command History
ModificationRelease
This command was introduced .Release 3.6.0
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
OL-30353-01 385
Watchdog Commands
show critmon statistics

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English