Cisco XR 12000 User Manual

show system verify
To verify the system parameters, use the show system verifycommand in EXEC mode.
show system verify [start| report| detail]
Syntax Description
(Optional) Performs an initial analysis of the system and stores the information
for subsequent verification.
start
(Optional) Generates a detailed report for the system verification process.detail
(Optional) Generates a report for the system verification process.report
Command Default
No default behavior or values
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
You must run the show system verify command with the start keyword before generating any reports.
Task ID
OperationsTask ID
readsystem
Examples
The following example shows how to prepare for system verification:
RP/0/0/CPU0:router# show system verify start
Storing initial router status ...
done.
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
OL-30353-01 127
Tech-Support Commands
show system verify

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English