Cisco XR 12000 User Manual

show tech-support routing isis
To automatically run show commands that display information specific to Intermediate System-to-Intermediate
System (IS-IS) debugging, use the show tech-support routing isis command in EXEC mode.
show tech-support routing isis {terminal [page]| file send-to [background] [compressed| uncompressed]}
Syntax Description
Displays the command output on the terminal.terminal
(Optional) Displays the command output on a single page at a time. Use the Return
key to display the next line of output or use the space bar to display the next page
of information. If not used, the output scrolls (that is, it does not stop for page
breaks).
Press the Ctrl-C keys to stop the command output.
page
Specifies that the command output is saved to a specified file.file
Name of the file. The following valid options are listed:
•
filename
•
bootflash: filename
•
compactflash: filename
•
disk0: filename
•
disk1: filename
•
flash: filename
•
ftp: filename
•
harddisk: filename
•
harddiska: filename
•
nvram: filename
•
rcp: filename
•
slot0: filename
•
slot1: filename
•
tftp: filename
sent-to
(Optional) Specifies that the command runs in the background.background
(Optional) Displays compressed command output.compressed
(Optional) Displays the command output with no compression.uncompressed
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
320 OL-30353-01
Tech-Support Commands
show tech-support routing isis

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English