Cisco XR 12000 User Manual

show captured packets
To display information on packets that are switched and punted in the software, use the show captured
packets command in EXEC mode.
show captured packets {ingress| egress} [interface type interface-path-id] [hexdump] [last number]
[single-line] location node-id
Syntax Description
Specifies ingress dropped packets.ingress
Specifies egress dropped packets.egress
(Optional) Specifies an interface.interface
(Optional) Interface type. For more information, use the question mark (?)
online help function.
type
(Optional) Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces
currently configured on the router.
Note
For more information about the syntax for the router, use the question mark (
? ) online help function.
interface-path-id
(Optional) Displays the packet contents in hex.hexdump
(Optional) Specifies the last number of packets in the queue to display.
last number
(Optional) Displays a one-line summary of the captured packets to facilitate
the use of the include and exclude operators.
single-line
(Optional) Displays packet information for a specified node. The node-id
argument is entered in the rack/slot/module notation.
location node-id
Command Default
No default behavior or values
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
OL-30353-01 43
Troubleshooting Commands
show captured packets

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English