Cisco XR 12000 User Manual

show tech-support chdlc
To automatically run show commands that display debugging information related to Cisco high-level data
link control (CHDLC) protocol, use the show tech-support chdlc command in the EXEC mode.
show tech-support chdlc file send-to [interface| slow] [location node-id] [rack]
Syntax Description
Specifies that the command output is saved to a specified file.file
Name of the file. The following valid options are listed:
•
filename
•
bootflash: filename
•
compactflash: filename
•
disk0: filename
•
disk1: filename
•
flash: filename
•
ftp: filename
•
harddisk: filename
•
harddiska: filename
•
nvram: filename
•
rcp: filename
•
slot0: filename
•
slot1: filename
•
tftp: filename
send-to
(Optional) Displays information about a specific interface.interface
(Optional) Displays the debugging output of chdlc.slow
(Optional) Specifies a node.location
(Optional) Node ID. The node-id argument is entered in the rack/slot/module
notation.
node-id
(Optional) Displays a list of racks.rack
Command Default
None.
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
184 OL-30353-01
Tech-Support Commands
show tech-support chdlc

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English